YFI Hotspot Manager on Fedora 18 / 19 and Centos 6.4

Ok. Back to my experiment. I have spent many days to set up YFI Hotspot Manager, using Fedora 18 64bit, Fedora 19 64bit and Centos 6.4 64bit. If you are using 32 bit, it should be no problem. I didn’t use Ubuntu, because it’s often used. I do not want to be called just copy the post. Although this post reference to posts that already exist.

As usually, I assume a computer already installed, one of these operating systems, Fedora 18 / 19 or Centos 6.4, with a minimum packet. After configuration ethernet, and internet is ok, then continue to the next step.

Install php mysql httpd/apache & file requirement.

Start with installation the file / package necessary. I didn't install all the file / package, so as not to burden the server.

yum update.

yum install wget mc vim unzip zip gcc gcc-c++ make git svn nano tar patch mod_ssl dnsmasq net-tools

Then install the main files (php mysql httpd / apache) to build a server,

yum install mysql-server php httpd php-mysql php-xml php-gd php-pear php-pdo php-devel php-common ImageMagick

Setup the firewall

For firewall, I just need iptables. In Fedora 18 / 19, before using iptables, first stop or turn off and disable firewalld.

systemctl stop firewalld

systemctl disable firewalld

and then continue to install iptables and system config firewall

yum install iptables-services iptables-utils system-config-firewall-tui system-config-firewall

configure the firewall so that some services (eg http service) can be accessed from other computers.

system-config-firewall

system-config-firewall wizard will appear. Then select customize, with press tab. Then press enter.

Next, in trusted services section, select some service that to be accessed. For example www (http) and ssh.

Next, select close, then press enter. Automatically, file /etc/sysconfig/iptables will created. If you want to change service port (trusted services), edit the file (vim /etc/sysconfig/iptables).

Enable service, to be run automatically at startup.

In fedora 18 / 19

systemctl enable iptables

systemctl enable mysqld

systemctl enable httpd

systemctl enable dnsmasq

In centos 6.4

[root@localhost ~]# chkconfig --level 235 mysqld on

[root@localhost ~]# chkconfig --level 235 httpd on

[root@localhost ~]# chkconfig --level 235 postfix off

[root@localhost ~]# chkconfig --level 235 dnsmasq on

[root@localhost ~]# chkconfig --level 235 ip6tables off

Edit httpd.conf

Edit file /etc/httpd/conf/httpd.conf, and in the end of line, add some line configuration below.

## -- YFi begin

<Directory /var/www/html/c2>

AllowOverride All

</Directory>

#-------COMPRESS CONTENT-----------

# place filter 'DEFLATE' on all outgoing content

SetOutputFilter DEFLATE

# exclude uncompressible content via file type

SetEnvIfNoCase Request_URI \.(?:exe|t?gz|jpg|png|pdf|zip|bz2|sit|rar)$ no-gzip

#dont-vary

# Keep a log of compression ratio on each request

DeflateFilterNote Input instream

DeflateFilterNote Output outstream

DeflateFilterNote Ratio ratio

LogFormat '"%r" %{outstream}n/%{instream}n (%{ratio}n%%)' deflate

CustomLog /var/log/httpd/deflate.log deflate

# Properly handle old browsers that do not support compression

BrowserMatch ^Mozilla/4 gzip-only-text/html

BrowserMatch ^Mozilla/4\.0[678] no-gzip

BrowserMatch \bMSIE !no-gzip !gzip-only-text/html

#----------------------------------

#------ADD EXPIRY DATE-------------

<FilesMatch "\.(ico|pdf|flv|jpg|jpeg|png|gif|js|css|swf)$">

Header set Expires "Thu, 15 Apr 2012 20:00:00 GMT"

</FilesMatch>

#----------------------------------

#--------Remove ETags --------------------

FileETag none

#-----------------------------------------

## -- YFi end

Ensure the following modules are enabled in Apache (the /etc/httpd/conf/httpd.conf file)

LoadModule rewrite_module modules/mod_rewrite.so

LoadModule deflate_module modules/mod_deflate.so

LoadModule headers_module modules/mod_headers.so

Edit /etc/php.ini

mcedit /etc/php.ini

short_open_tag = On

date.timezone = Asia / Jakarta --->Change this to your timezone

Then restart service web/apache

service httpd restart

Download cakephp, yfi_cake and yfi viewer.

Download cakephp and install

wget https://github.com/cakephp/cakephp/archive/1.2.12.tar.gz

mv 1.2.12.tar.gz /var/www/html/

cd /var/www/html/

tar zxvf 1.2.12.tar.gz

ln -s /var/www/html/cakephp-1.2.12 /var/www/html/c2

ln -s /var/www/html/cakephp-1.2.12 /var/www/c2

Next. Download yfi_cake. Remember this. If you are using PHP 5.3, use version 5 yfi cake. If you are using php 5.4 or latest, use the svn version yfi_cake. In this experiment, php version is 5.4.16, so use yfi_cake svn version.

cd /usr/local

mkdir yfi_svn

cd yfi_svn

svn checkout svn://svn.code.sf.net/p/hotcakes/code/trunk/yfi yfi

svn checkout svn://svn.code.sf.net/p/hotcakes/code/trunk/yfi_cake yfi_cake

mv yfi_cake /var/www/c2/

mv yfi /var/www/html/

chown -R apache. /var/www/html/c2/yfi_cake/tmp

chown -R apache. /var/www/html/c2/yfi_cake/webroot/img/graphics

Create database.

Just for make sure, mysql running.

service mysqld restart

For security, make password for root user.

mysqladmin -u root password yourpasswordmysql

Then create database for yfi hotspot manager.

mysql -u root -p

create database yfi;

GRANT ALL PRIVILEGES ON yfi.* to 'yfi'@'127.0.0.1' IDENTIFIED BY 'yfi';

GRANT ALL PRIVILEGES ON yfi.* to 'yfi'@'localhost' IDENTIFIED BY 'yfi';

exit;

Dump the sample database in yfi database.

mysql -u root -p yfi < /var/www/html/c2/yfi_cake/setup/db/yfi.sql

You can see the database that you have created in the folder /var/lib/mysql

At last, edit /etc/selinux/config

mcedit /etc/selinux/config

SELINUX=disabled

reboot, and let's hope everything goes well…

Test yfi_cake and yfi viewer from browser

Open browser, and go to http://<your-ip-address>/c2/yfi_cake/users/

Continue testing the viewer component of yfi. Go to http://<your-ip-address>/yfi.

Try to enter using username and password below.

Role	Username	Password
Administrator	root	admin
Access Provider	ap	ap
Permanent User	dvdwalt@ri	dvdwalt@ri

If everything is ok, continue to next steps.

Note: If you find error when you install yfi hotspot manager, look at How to Fix Problems in Installing "YFI Hotspot Manager" in this blog. may be you will find the error same is like yours, and you can fix it easily.

Configuring Freeradius

Don’t install default freeradius from command yum, because it’s never successful. I don’t know why. If you have the new information about this, please comment.

So, download freeradius 2.2.0, from http://freeradius.org. Before compile freeradius, install file / package necessary.

yum install libtool-ltdl-devel mysql-devel perl-XML-Simple perl-XML-LibXML perl-suidperl perl-libxml-perl perl-ExtUtils-Embed perl-Time-HiRes

cd /usr/local/

wget ftp://ftp.freeradius.org/pub/freeradius/freeradius-server-2.2.0.tar.gz

tar zxvf freeradius-server-2.2.0.tar.gz

cd freeradius-server-2.2.0

./configure; make; make install

ldconfig

Setup FreeRadius for working together with YFI Hotspot Manager.

cd /usr/local/etc/

mv raddb/ raddb.orig

cp /var/www/html/c2/yfi_cake/setup/radius/raddb.tar.gz /usr/local/etc/

tar -xzvf raddb.tar.gz

To start automatically, when start-up. Do this command below.

cp /usr/local/sbin/rc.radiusd /etc/init.d/radiusd

When you running command “chkconfig --add radiusd”, you will get error “service radiusd does not support chkconfig”.
How to fix it. Edit file /etc/init.d/radiusd, and in the top section of file, add some line command below, . So it will be like this.

#!bin/sh

# chkconfig: 2345 80 30

# description: FreeRadius 2.2.0

# processname: radiusd

# pidfile: $rundir/radiusd.pid

Then running command chkconfig to add radiusd service. It should be work well.

chkconfig --add radiusd

chkconfig --level 235 radiusd on

Next. Because I use svn, edit /usr/local/etc/raddb/sites-enabled/default

mcedit /usr/local/etc/raddb/sites-enabled/default

Find authorize { section, and comment perl and sql (perl and sql, usually at below “update control”), so it wil be like this.

update control {

Auth-Type := perl

}

#perl

#sql

Debug the freeradius, with command radiusd -X.

If everything is normal, the results is like below,

... adding new socket proxy address * port 41799

Listening on authentication address * port 1812

Listening on accounting address * port 1813

Listening on command file /usr/local/var/run/radiusd/radiusd.sock

Listening on proxy address * port 1814

Ready to process requests.

Press Ctrl + C, to stop. Continue to the next steps.

Setup pptpd to work with YFi Hotspot Manager

yum install ppp

Go to http://poptop.sourceforge.net/yum/stable/packages/. Look at the file list, select and download according to the linux operating system that you are using.

For Fedora 18 / 19, 32bit

rpm -Uvh http://poptop.sourceforge.net/yum/stable/packages/pptpd-1.3.4-2.fc19.i686.rpm

For Fedora 18 / 19, 64bit:

rpm -Uvh http://poptop.sourceforge.net/yum/stable/packages/pptpd-1.3.4-2.fc19.x86_64.rpm

For Centos 6.4, 32bit

rpm -Uvh http://poptop.sourceforge.net/yum/stable/packages/pptpd-1.3.4-2.el6.i686.rpm

For Centos 6.4, 64bit

rpm -Uvh http://poptop.sourceforge.net/yum/stable/packages/pptpd-1.3.4-2.el6.x86_64.rpm

Edit the pptpd config file ( vim /etc/pptpd.conf) at the end line, add:

localip 10.20.30.1

Make the chap-secret file be writable. So the client (apache) can access the file.

chown root.apache /etc/ppp/chap-secrets

chmod 664 /etc/ppp/chap-secrets

At last, make pptpd service will be running automatically when startup.

chkconfig --level 235 pptpd on

service pptpd restart

Cron Script

cp /var/www/html/c2/yfi_cake/setup/cron/yfi /etc/cron.d/

Then edit /etc/cron.d/yfi. Find user www-data, and change to be user apache. Then save it. So it will be like this.

*/5 * * * * apache /var/www/c2/cake/console/cake -app /var/www/c2/yfi_cake nasmonitor >> /dev/null 2>&1

*/5 * * * * apache /var/www/c2/cake/console/cake -app /var/www/c2/yfi_cake voucher_cleanup -check_for_used >> /dev/null 2>&1

0 */3 * * * apache /var/www/c2/cake/console/cake -app /var/www/c2/yfi_cake voucher_cleanup -check_for_depleted >> /dev/null 2>&1

*/5 * * * * root /var/www/c2/cake/console/cake -app /var/www/c2/yfi_cake restart_checker >> /dev/null 2>&1

*/5 * * * * apache /var/www/c2/cake/console/cake -app /var/www/c2/yfi_cake notify_checker >> /dev/null 2>&1

1 0 * * * apache /var/www/c2/cake/console/cake -app /var/www/c2/yfi_cake month_end -start >> /dev/null 2>&1

50 23 * * * apache /var/www/c2/cake/console/cake -app /var/www/c2/yfi_cake month_end -end >> /dev/null 2>&1

#This is a Work In Progress

#*/5 * * * * apache /var/www/c2/cake/console/cake -app /var/www/c2/yfi_cake client_check >> /dev/null 2>&1

#0 */6 * * * apache /var/www/c2/cake/console/cake -app /var/www/c2/yfi_cake rogue_check >> /dev/null 2>&1

#We can auto clean-up stale entries after the amount of seconds specified in the configuration file:

*/5 * * * * apache /var/www/c2/cake/console/cake -app /var/www/c2/yfi_cake stale_session_cleanup >> /dev/null 2>&1

Captive Portal / Page Login

For this section, I think I do not need to explain anymore. Because in this blog, I have been posting. But if someone asks me to explain again, I'll post again for portions captive portal. Ok. At this point, yfi hotspot manager as a hotspot billing system is complete and ready for use.

Search This Blog

Abi Paudel's