Mikrotik RB751G-HND virtual AP Attach
Mikrotik RB751G-HND virtual AP Attach
Creating the virtual AP
Click "Wireless" and then on "interfaces".
Select "VirtualAP"
For "general" see "wlan2" position.
Change this name, as an example: "ap-guest". Click on "apply".
Click "Wireless".
At "SSID" give a name to transmit the AP. Click "apply" and "OK".
Thus, virtual access point is created.
Assign IP address and set up a DHCP server
Click "IP" and then "addresses".
Click on the blue cross to allocate an IP address.
Under "Interface" virtual access point. Enter to "address" the virtual access point an IP address with a / 24 behind. Click "apply" and "ok".
Click "IP" then "DHCP server", here are the steps that are created automatically but we will go through this once.
Click DHCP setup
Select the virtual access point. Click "next".
When "DHCP address space" click "next".
At "gateway for DHCP network" will appear the IP address that you have given to the virtual access point. Then click "next".
At "addresses to give out" then click "next".
"DNS servers" enter the IP addresses of your internet provider. Click "next".
With "lease time" (this is the time that the DHCP server will reserve the IP address to a specific PC) the institution let alone whether to change it, click on "next".
The DHCP server is configured.
Wet settings
Click "IP" and then on "firewall."
Click further by "NAT" and then click on the blue cross.
- In "chain" select "srcnat".
- At "src address" you fill in the IP range.
- For "out interface", select the Ethernet interface connected to the ISP modem.
In "action" select "masquerade".
To avoid setting the two IP ranks can achieve together we can set firewall rules.
Click "IP" and then on "firewall."
- For "general" select at "chain" "forward"
- When "Scr address" you enter the IP range 192.168.88.0/24 in.
- At "Dst address" you enter the IP range 192.168.11.0/24 in.
Click the "action" in "action" select "drop". This will prevent users of the IP range 192.168.88.0/24 will have access to IP range 192.168.11.0/24.
Now we do the reverse. Users on the IP range 192.168.11.0/24 will also gain access to the IP range 10.98.88.0/24.
- For "general" select at "chain" "forward"
- When "Scr address" you enter the IP range 192.168.11.0/24 in.
- At "Dst address" you enter the IP range 192.168.88.0/24 in.
Click the "action" in "action" select "drop".
Thus, this is ready for use.
Comments